Expert HVAC Installation Services Tailored to Colorado Springs, CO Properties
Around the Clock!
Licensed HVAC professionals delivering precise HVAC installations across Central Colorado
A new HVAC system is only as good as its installation. At Around the Clock Heating, Cooling, Plumbing and Electric, we size every system precisely, install it to code, and verify performance before we leave, so you get reliable, efficient cooling from day one. You’ll get competitive pricing and free estimates upfront, so you know exactly what to expect before any work begins.
Call us or schedule your free consultation online to get your home cooling the way it should.
Why Colorado Springs Homeowners Trust Us for HVAC Installation
Colorado Springs’s housing stock is varied, with century-old homes, larger colonials, and modern properties. Each home presents different challenges for system selection, sizing, and setup.
We’ve worked across:
- Historic homes with tight mechanical spaces, older electrical panels, and plaster construction.
- Newer insulated homes where short-cycling and humidification are issues.
- Ductless mini-split installation for homes without ductwork.
- Replacing the aging home heating system with modern, high-efficiency units for measurable improvements in comfort and energy costs.
- Irregular layouts where standard installation approaches often don’t apply.
We do not provide system quotes over the phone. We conduct an on-site evaluation, perform accurate calculations, and recommend a solution that matches your home’s needs.
Accurate Sizing Is the Foundation of Our Services
The most common HVAC installation mistake is improper sizing. If too small, the system runs nonstop without meeting demand. If too large, it short-cycles, pulls humidity incompletely, and wears out components prematurely.
Our HVAC system installation process is built on the Manual J load calculation methodology, the industry standard endorsed by the Air Conditioning Contractors of America (ACCA). This accounts for your home’s square footage and ceiling height, window area and orientation, insulation values, local climate design temperatures, and existing duct configuration.
Once we have accurate load data, we select equipment that matches your home’s actual demand at Colorado Springs’s peak summer conditions. We verify that the equipment meets or exceeds Colorado’s SEER2 efficiency minimums.
Signs It’s Time to Replace Rather Than Repair
Not every cooling issue requires a new system; sometimes, HVAC repair is smarter. But these signs consistently point to replacement as the better investment:
- The system is 15 years old or more, and efficiency has noticeably declined.
- You’ve spent $500 or more on repairs in the past two seasons without a lasting fix.
- The unit still runs on R-22 refrigerant, which is now phased out under EPA regulations and is expensive to source.
- Rooms are cool inconsistently, or the system runs constantly even on mild days.
- Energy bills are climbing year over year without explanation.
If two or more apply, call us for a clear answer on whether repair or replacement makes more sense for your situation.
Our HVAC Installation Process
- Load calculation and equipment selection: We start with a Manual J calculation based on your home’s actual construction and layout. We select equipment to match measured demand, not estimated square footage.
- Permit application: We apply for the required mechanical permit and manage the entire inspection process. Every installation we complete is documented and code-compliant.
- Electrical verification: We confirm your panel can support the new system. Any required new circuits or disconnects are coordinated before installation.
- Equipment installation: The outdoor condenser is set on a level pad with proper clearances. The indoor air handler is secured and connected to your duct system. Line sets are connected, insulated, and protected.
- Refrigerant charging: All refrigerant work is performed in accordance with EPA Section 608 requirements. Charge is set to the manufacturer’s specification by measurement, not estimation.
- Thermostat setup: We install or configure your thermostat and verify correct communication across all system components.
Performance Verification: We Test Before We Leave
After installation, we run a full performance check before the job is closed out.
We measure:
- Supply and return air temperatures to confirm a 15°F-20°F differential across the evaporator coil.
- Check static pressure with a digital manometer to confirm the duct system isn’t overloading the blower.
- Verify airflow in CFM at supply registers to confirm conditioned air is reaching key living spaces.
- Confirm refrigerant charge by gauging and weighing.
We document the results, walk you through the findings, and schedule the required mechanical inspection. Your system doesn’t just run; it’s verified.
Why Delaying a Failing System Costs More Than You Think
Brandon Chuhaloff sought a smooth, stress-free HVAC upgrade, including a new AC unit and furnace replacement. Like many homeowners, he wanted assurance that the project would be completed correctly, efficiently, and with minimal disruption.
Our team managed the project from the initial quote to final installation, arriving prepared and ready to work. We answered questions and explained each step, ensuring Brandon remained informed throughout.
Brandon shared:
“Great experience with these guys all the way from the original quote to the finished product. Installing a new AC unit and replacing my old furnace went seamless from start to finish.” Read his full Google review here.
The project was completed with professionalism, teamwork, and a focus on quality. Brandon’s experience demonstrates the value of working with a team that offers technical expertise, clear communication, and reliable workmanship.
What You Get With Around the Clock Heating, Cooling, Plumbing, and Electric
- Licensed (LIC#26680) insured HVAC professionals.
- Permit-managed from start to finish, and hand you a code-compliant installation.
- Manual J sizing on every job, not guesswork.
- High-efficiency equipment from reputable manufacturers that deliver real long-term energy savings.
- Post-installation performance and refrigerant charge are confirmed before we leave.
- Transparent pricing, upfront estimates, and financing options available.
- Regular HVAC tune-ups and maintenance with priority service and emergency support.
Schedule Your HVAC Installation Consultation Today
We’ll assess your home, walk you through your options honestly, and make sure your new system is installed right, the first time. Call us today or book an online consultation.
FAQs
How long does installation take?
A standard replacement typically takes one full day. More complex situations, like limited equipment access and electrical updates, may add time.
Is a permit required?
Yes. Mechanical permits are required throughout El Paso County.
How do you determine the right system size?
Through a Manual J load calculation that accounts for square footage, insulation, ceiling height, window area, and local climate data, not a rule-of-thumb estimate.
What SEER2 rating should I look for?
Colorado requires a minimum SEER2 of 13.4 for split systems. Higher ratings (16 to 20+) lower operating costs. We’ll walk you through the payback math for your specific home.
What happens to my old equipment?
We remove it and recover refrigerant in compliance with EPA regulations before disposal. Nothing is vented to the atmosphere.
Do you install systems in homes without ductwork?
We replace and upgrade existing central air systems using existing ductwork. We do not install new duct systems.
How much can a new system save on energy bills?
Replacing a 10 SEER system with a modern 16 SEER2 unit can cut cooling energy consumption by 30% to 40%. We’ll estimate the impact on your home during the consultation.
Do you serve areas outside Colorado Springs?
Yes, we also serve Monument, Widefield, Fountain, Peyton, and more.